Never attempt to download firmware from a different product into your device. Although the hardware may have the same appearance, due to internal differences, attempting to download a firmware image of one product into the hardware of another product may damage the hardware or boot ROM. This damage is not covered by warranty or DCB service agreements.
EtherPath, EtherPoll, EtherGate, EtherModbus, EtherDNP3, EtherBridge, etc. They all look similar but have different uses and different firmware (the software program that it runs internally). In addition, different versions of the product may require specific firmware versions. Go to this page to help select the proper firmware file for your product. If there's any question, contact DCB tech support for assistance.
Do you want to receive an email when firmware changes?
These files are used with all EtherSeries products other than the IP, X4, and
ET series (which upload the firmware using any web browser).
Which version do I need? Go to this page to help select the proper firmware file for your product.
howto.pdf Instructions on upgrading EtherSeries
(other than the AVA, IP, and ET series) product firmware
Upgrade Version 4.1 Self-installing
firmware installation program. For Windows 8.1, 8, 7, XP, Windows 20000, Windows 98. Since this is a .exe file
type, you might have to use "save link as" to download it using some
browsers. Insure that you have proper "rights" on the folder you are
using.
Note that the Upgrade program installs and uses the third party Winpcap package.
Upgrade3.00-1.i386.rpm
Self-installing firmware installation RPM package (RedHat Linux, Fedora, etc)(other
than the IP and ET series products).
AVA - Audio Voice Adapter
The AVA is updated using the USB adapter provided with the product, a Windows PC, and software included here. Firmware Upgrade History A log of AVA
firmware changes.
Update program zip package This zip file includes Instructions on upgrading the AVA, a copy of the drivers that might be required for the USB adapter, and a text file with instructions. This file should be unzipped using your zip program and stored in an accessable directory on the PC.
AVA_V1.79 Latest firmware image for the Serial AVA. (Use your browser's "Save as" to download the file.)
AVALAN_V1.5 Latest firmware image for the Ethernet AVA-E LAN interface. This package includes an instruction file. (Use your browser's "Save as" to download the file.)
AVA_V3.0 Latest firmware image, update program, and instructions for the Ethernet AVA-E. (Use your browser's "Save as" to download the file.)
EtherPath Files (Standard One Port Serial Server)
Firmware Upgrade History A log of EtherPath
firmware changes.
Which version do I need? Go to this page to help select the proper firmware file for your product.
howto.pdf Instructions on upgrading
EtherPath firmware
EtherPath_V72.bin NEWEST firmware image for current RoHS version
EtherPath SS-1R.
EtherPath_V60.bin Latest firmware image for the SS-1 hardware version
of EtherPath produced between 2002 and mid 2007.
EtherPath_V35.bin Last firmware image for the SS-100 hardware version of EtherPath produced between 2000 and mid 2002 (hardware with BNC connector and dip switches).
ss_v14a.bin Last firmware image for
Version 1.4 EtherPath. (required for very old [pre-2000] SS-100 hardware
platform.)
EtherPath Redirect Files ( Server-locked version of the EtherPath)
howto.pdf Instructions on upgrading
EtherPath firmware
Firmware Upgrade History A log of EtherPoll
firmware changes.
Which version do I need? Go to this page to help select the proper firmware file for your product.
howto.pdf Instructions on upgrading
EtherPoll firmware
EtherPoll_V73.bin NEWEST firmware image for current RoHS version
EtherPoll EPL-1R.
EtherPoll_V50.bin Latest firmware image for the EPL-1 hardware version
of EtherPoll produced between 2002 and mid 2007.
EtherPoll_V13.bin Last firmware image for the EtherPoll hardware version of EtherPoll produced between 2000 and mid 2002 (hardware with BNC connector and dip switches).
Multi-port EtherPoll Files
Firmware Upgrade History A log of Multi-port EtherPoll
firmware changes.
Which version do I need? Go to this page to help select the proper firmware file for your product.
howto.pdf Instructions on upgrading
EtherPoll firmware
EPL-2+_v1_06.bin Latest firmware image for current version
Two Port EPL-2
EPL-4+_v1_07.bin Latest firmware image for current version
Four Port EPL-4.
Please telephone or email DCBLatest firmware image for the Encrypted EtherPoll EEP-2. Export regulations prevent us from placing this file on the web site.
EtherMbus_V18.bin Latest firmware
image for the EMB-02 produced until mid 2007
EtherDNP-3 Files EDNP3 (DNP-3 Gateway)
Firmware Upgrade History A log of EDNP3
firmware changes.
Which version do I need? Go to this page to help select the proper firmware file for your product.
EDNP3_V13.bin Latest firmware image for
EDNP-3 produced until mid 2007
EtherGate Files
Firmware Upgrade History A log of EtherGate
firmware changes.
Which version do I need? Go to this page to help select the proper firmware file for your product.
EtherGate_V49.bin Latest firmware image
for Ethergate produced until mid 2007.
EtherBridge ESB-XX Files (Ethernet Bridge Via Serial Links)
Firmware Upgrade History A log of ESB family
firmware changes.
Which version do I need? Go to this page to help select the proper firmware file for your product.
MultipointBridge_V42.bin
Latest firmware image for One-Port(hardware) MultiPoint EtherBridge. (Don't use this unless
you have Multi-Point bridges.)
MultipointBridge2_V42.bin
Latest firmware image for Two-Port(hardware) MultiPoint EtherBridge. (Don't use this unless
you have Multi-Point bridges.)
MultipointBridge_opto2_V42.bin
Latest firmware image for Two-Port(hardware) Opto-isolated MultiPoint EtherBridge. (Don't use this unless
you have Multi-Point bridges with opto isolation.)
SMDBridge_V40.bin Latest firmware
image for SMD (SCADA multi-drop multiplexer and FRAD ) MultiPoint
EtherBridge. (Don't use this unless you have SMD or FRAD Multi-Point
bridges.)
Non-RoHS versions, produced prior to mid 2007.
EtherBridge_V29.bin Latest
firmware image for EtherBridge. This is for the standard EtherBridge.
MultipointBridge_V24.bin
Latest firmware image for MultiPoint EtherBridge. (Don't use this unless
you have Multi-Point bridges.)
SMDBridge_V24.bin Latest firmware
image for SMD (SCADA multi-drop multiplexer and FRAD ) MultiPoint
EtherBridge. (Don't use this unless you have SMD or FRAD Multi-Point
bridges.)
EEP Encrypted EtherPoll
This product is updated using your web browser, no special update program
needed.
Which version do I need? Go to this page to help select the proper firmware file for your product.
This product is updated using your web browser, no special update program is
needed. Firmware Upgrade History A log of LLEA
family firmware changes.
LLEA firmware can not be downloaded from the web site. Contact Customer Support for assistance via phone at 800-432-2638 or through our contact form.
PNE - Ethernet Network Emulator
This product is updated using the internal menu function. No special update program is needed. Firmware Upgrade History A log of PNE
family firmware changes.
Contact Customer Support for assistance at 217-897-6600 or via the contact page.
PR - Packet Repeater
This product is updated using your web browser, no special update program is needed. Firmware Upgrade History A log of PR
family firmware changes.
PR-6602 Version 1.02 Latest firmware image for the PR-6602 Packet Repeater. (Use your browser's "Save as" to download the file.)
PR-6606 Version 2.01 Latest firmware image for the PR-6606 Packet Repeater. (Use your browser's "Save as" to download the file.)
UT Encrypted UDP Tunnel Bridge Family
This product is updated using your web browser, no special update program
needed. Firmware Upgrade History A log of UT
family firmware changes.
All UT product firmware is export limited, and may not be downloaded from the web site. Contact Customer Support for assistance via phone at 800-432-2638 or through our contact form.
XT Encrypted Tunnel Bridge Family
This product is updated using your web browser, no special update program
needed. Firmware Upgrade History A log of XT
family firmware changes.
All XT product firmware is export limited, and may not be downloaded from the web site. Contact Customer Support for assistance via phone at 800-432-2638 or through our contact form.
Map34 - Mapping Software for Loop Telecommunications International AM3440 Products
This product requires a license key for operation. Each AM3440 card license is authorized using a unique software key supplied by DCB. Software Upgrade History A log of MAP34
software changes.
Map34 Newest version (approximately 15 MB). Because this is an .exe file, you may need to use the "right-click/ save as" method to download your copy using Firefox.
Map41 - Mapping Software for Loop Telecommunications International V4150 Products
This product requires a license key for operation. Each CPU card license is authorized using a unique software key supplied by DCB. Software Upgrade History A log of MAP41
software changes.
Map41 Newest version (approximately 15 MB). Because this is an .exe file, you may need to use the "right-click/ save as" method to download your copy using Firefox.
Map95 - Mapping Software for Loop Telecommunications International O-9500 and O-9550 Products
This product requires a license key for operation. Each CPU card license is authorized using a unique software key supplied by DCB. Software Upgrade History A log of MAP95
software changes.
Map95v3 Newest version (approximately 14 MB). Because this is an .exe file, you may need to use the "right-click/ save as" method to download your copy using Firefox. This is the current version that supports both the O-9500 and O-9550 product lines.
Map95v2 uses the same controller keys as Map95v1.
Other Files
UdpTerm.exe Our PC terminal emulation program that uses UDP/IP instead of TCP/IP. (Runs
under Windows). Save into the directory of your choice. It's an .exe
file. A useful free and unsupported utility. Most terminal emulation programs use telnet, and transport via TCP/IP. This one uses sends raw typed characters using UDP/IP. It's quite useful for testing SCADA terminal server equipment.
pct.zip Our PC terminal emulation program (Runs
under MS-DOS). Unzip it into the directory of your choice. It's an .exe
file and a configuration file. A useful free and unsupported utility.
tftpd Our favorite open source TFTP server. It's an .exe file. Just save it on your Windows PC and run it. A useful free and unsupported utility. While it's unsupported, here are a few hints to get you started,TFTP Server Quickstart. This is an updated version compiled in 2020 with static links (no DLLs required), that corrects the protocol bug where TFTP write operations without any option negotiation stalls.
.
Data Comm for
Business Inc.
2949 County Road 1000 E
Dewey, Il 61840
