Emulex Performance 4000 Terminal Server
Note: Emulex 4000 may be configured for software flow control or hardware flow control. Pin 4 in these cables
only required for "long" cable runs. Not using pin 4 makes cable construction much easier!
Emulex 4000 software flow control/device present cable to DCB mux
| Emulex
RJ12 | Direction | SR RJ45 | SPL
DB25P | Signal |
| 1 | <=== | 2 | 8 | DCD |
| 2 | <=== | 5 | 3 | RxD |
| 3 | ==== | 4 | 7 | SG |
| 4
{optional} | ==== | 4 | 7 | SG |
| 5 | ===> | 6 | 2 | TxD |
| 6 | ===> | 8 | 4 | RTS |
Emulex 4000 hardware flow control cable to DCB mux
| Emulex
RJ12 | Direction | SR RJ45 | SPL
DB25P | Signal |
| 1 | <=== | 7 | 5 | CTS |
| 2 | <=== | 5 | 3 | RxD |
| 3 | ==== | 4 | 7 | SGND |
| 4
{optional} | ==== | 4 | 7 | SGND |
| 5 | ===> | 6 | 2 | TxD |
| 6 | ===> | 3 | 11 | Busy |