Compatible Systems 900i, 1000R routers tech note
Note: router WAN port must be configured for async, 38.4kbps, hardware flow control, dedicated connection.
Mux ports at both locations must be configured "CBL" (CTS Busy Low) 38.4kbps. Use cable below with provided
router DB25P to miniDIN cable.
Router console programming:
Enter Password: letmein
MicroRouter 900i > interface ethernet a
MicroRouter900i > set ip address {your ip address}
Enter Password: letmein
*Ethernet A# set ip mask {your ip mask}
*Ethernet A# interface wan a
*Wan A# set wan serial type async
*Wan A# set wan serial baud 38400
*Wan A# set wan serial fcntl hw
*Wan A# set wan connect mode dedicated
*Wan A# save
Router to DCB mux cable
| Router
DB25S | Direction | SR RJ45 | SPL
DB25P | Signal |
| 2 | ===> | 6 | 2 | TxD |
| 3 | <=== | 5 | 3 | RxD |
| 4 | ===> | 3 | 11 | Busy |
| 5 | <=== | 7 | 5 | CTS |
| 6 | <=== | 1 | 6 | DSR |
| 7 | ==== | 4 | 7 | SG |
| 8 | <=== | 2 | 8 | DCD |
| 20 | ===> | 8 | 4 | RTS |
Available from DCB as Remote PC 25 Adaptor, Line Cord, and SPL Port Adaptor