Alloy I/O
Note: Alloy only supports hardware flow control because it uses PC scan codes. Host mux
ports must be set for "CNB" and remote mux ports set for "CBL".
Alloy I/O to DCB mux cable
| Signal | Alloy RJ12 | Direction | SPL DB25P | SR RJ45 | Signal |
|---|
| RCD | 1 | <=== | 8 | 2 | DCD |
| CTS | 2 | <=== | 5 | 7 | CTS |
| TD | 3 | ===> | 2 | 6 | TxD |
| SG | 4 | ==== | 7 | 4 | SG |
| RD | 5 | <=== | 3 | 5 | RxD |
| RTS | 6 | ===> | 11 | 3 | Busy |