2200 Voice/Data Mux


Voice / Data Multiplexer with 2 voice and up to 2 data ports


The 2200 is no longer available from DCB. However, DCB now manufactues several low bit rate voice / data multiplexer products. Your browser will be redirected to an index of those products. Click here if your browser doesn't automatically redirect to that index.

  • Pays for itself in a few months
  • Two Voice, one or two Data Channels
  • V.35 interface or internal 56 Kbps DSU/CSU with Adaptive Equalization
  • 16 Kbps ADPCM voice
  • One 19.2 Kbps data channel, or two 9600 bps data channels
  • Synchronous or asynchronous data channel
  • Voice 2-wire and 4-wire voice interfaces , FXS, FXO, PLAR, PABX,2W/4W E&M


Also check out our newer low bit-rate voice multiplexers, the SR-VM series with 1, 2, or 4 voice channels and up to 16 data channels with dynamic bandwidth allocation. The SR-VM connects via satellite, wireless modems, asynchronous or synchronous RS-232, RS-422, or IP/Ethernet at speeds up to 128 Kbps. The data sheet is here.
All Voice/Data products are listed on the DCB Products page.

FEATURES
DESCRIPTION
SPECIFICATIONS

General
Voice Port Specifications
Data Port Specifications
Data/Voice Speed Combinations
Indicators
Controls
Telco
Physical/Electrical

APPLICATION

HOW TO ORDER


FEATURES


DESCRIPTION

The 2200 Voice/Data Mux provides two high quality voice circuits and two sync/async data channels over one standard 56Kbps digital telephone link. Options include an integral 56Kbps CSU/DSU. This flexible, high performance multiplexer can be user configured for either two voice channels and two RS-232 data ports (up to 9.6Kbps), sync or async, or two voice circuits and one RS232 data port at 19.2 Kbps. The DAWN 2200 converts standard analog telephone voice circuits to high-quality 16Kbps ADPCM digital voice signals. It meets all standard two-wire and four-wire PBX and central office interface requirements for line and/or trunk, supports Private Line Automatic Ringdown (PLARD), and is fully compatible with DTMF, SF, E&M and pulse dial signaling.

SPECIFICATIONS

General
Voice Port Specifications
Data Port Specifications
Data/Voice Speed Combinations
Indicators
Power, Signal Receive (DCD), Sync, Voice channel busy (A and B), Transmit Data, Receive Data
Controls
Front panel Remote or Local Loop, or Normal operation Rear panel DIP switches for voice channel mode, Data Speed, Clocking, Sync or Async data channel. .
Telco
Physical/Electrical

APPLICATION


How to Order

2200LV 2 Voice (FXS,FXO,PLAR) 1 or 2 Data with V.35 Interface $ 2,495
2200EV 2 Voice (w2/4r2 E&M Types I-IV)) 1 or 2 Data with V.35 Interface $ 2,495
2200LC 2 Voice (FXS,FXO,PLAR) / 1 or 2 Data with Integral 56Kbps DSU/CSU $ 2,695
2200EC 2 Voice (w2/4r2 E&M Types I-IV)) / 1 or 2 Data with Integral 56Kbps DSU/CSU $ 2,695

img
Data Comm for Business Inc.
2949 County Road 1000 E
Dewey, Il 61840
Voice: 217-897-6600
Toll Free: 800-4-DCB-NET
Toll Free: 800-432-2638
Email: Contact Page
Web: www.dcbnet.com
Fax: 217-897-1331
Shopping cart is
HACKER SAFE certified sites prevent over 99.9 of hacker crime.
All DCB web pages copyright ©1995--2016 Data Comm for Business, All rights reserved.
EtherPath®, EtherSeries®, EtherPoll®, EtherBridge® and EtherModem® are Registered Trademarks of Data Comm for Business, Inc.